Installing The System Board - Dell Inspiron 530sa Owner's Manual

Inspiron 530sb/530sd
1
2
Place the system board assembly that you just removed next to the
replacement system board to compare and ensure they are identical.

Installing the System Board

1 Gently align the board into the chassis and slide it toward the back of the
computer.
2 Using the screws, secure the system board to the chassis.
3 Replace the cables that you removed from the system board.
4 Replace the processor and the heat sink (see "Installing the Processor" on
page 167).
NOTICE:
and secure.
5 Replace the memory modules into the memory sockets at the same locations
from which you removed them (see "Installing Memory" on page 125).
6 Replace any add-in cards on the system board.
7 Replace the computer cover (see "Replacing the Computer Cover" on
page 174).
172
Removing and Installing Parts
1 screws (6)
Ensure that the processor fan/heat sink assembly is correctly seated
2 system board