Camera Status Display; Basic Camera Panel Operation - Minolta DIMAGE EX - SOFTWARE Software Instruction Manual

USING THE CAMERA PANEL

Camera Status Display

Displays the number of photos stored in the compact flash card in the camera and the remaining battery
level.
Displays the remaining capacity of the compact flash card.
The blue portion indicates the capacity already used.
Indicates whether or not a compact flash card is inserted in
the card slot.
in the Dimâge EX, or plug in the AC Adapter (sold
separately).
Indicates the number of the number of photos stored on the
compact flash card in the camera.
The camera is operating normally when this icon is rotating.
72
indicates that a card has been inserted.
indicates that the battery level is low. Terminate the
software immediately and replace the four batteries
Basic Camera Panel Operation (three buttons)
These three buttons are used to set the image capture type, the flash mode, and the self-timer for remote
photography.
Format (Image Capture Type)
• The image capture type changes in the order shown below each time this button is clicked.
Flash
• The mode changes in the order shown below each time this button is clicked.
• Refer to the Built-in Flash section of the camera instruction manual for details.
AUTO (Auto Flash)
FILL (Fill-Flash)
R-EYE (Auto flash with Red-eye Reduction)
OFF (Flash Cancel)
Timer (Self-timer)
• The self-timer is switched on/off each time this button is
clicked.
• When ON, the self-timer delays release of the shutter for
approximately 10 seconds.
• The self-timer is not available for Burst or Timelapse
images.
73