Minolta DIMAGE EX - SOFTWARE Software Instruction Manual page 9

Click on Install.
• Installation begins. A display indicating the progress of installation appears on the screen. Follow the
instructions on the screen.
• The following window appears when installation is complete.
Click on Restart.
WHERE TO FIND THE FILES
• User-selected Destination Folder
Digita Desktop (application software)
Goodies (folder)
• Extensions Folder
Digita Desktop (extension)
Digita Camera (extension)
• All the files listed above will be copied to the drive if Easy Install is used. If Custom Install is used,
only the user-selected files will be copied onto the drive.
14
CONNECTING THE CAMERA TO THE PC
Serial Adapter SC-EX1
Connect the camera to the serial port of the PC via the PC Serial Adapter SC-EX1.
IBM PC/AT COMPATIBLE
• When connecting to the Macintosh, use the Macintosh Adapter MA-EX1 in combination with the SC-EX1
cable, and insert it in the modem port (or printer port).
Switch the camera and PC power
OFF.
Remove the camera lens unit.
Align the projection on the
camera mount of the PC Serial
Adapter SC-EX1 with the hole in
the camera and press it in the
direction of the arrow until a
click is heard.
Insert the D-Sub 9-pin connector
on the PC Serial Adapter SC-EX1
into the serial port on the PC.
• Align the pins on the male connector of the serial port
with the holes in the female connector on the cable,
press the two together firmly, then tighten the two
screws.
Continued on Next Page.
15