QTIC MAIN PANEL
OPENING THE QTIC MAIN PANEL
There are two ways to open the QTIC panel.
• Start the software.
Select TWAIN from the File menu and Acquire...
from the submenu (p. 20 - 22).
The panel will appear as shown below.
• Display the QTIC Main Panel from the viewer or image
panel by clicking on the Acquire button in the toolbox.
62
DISPLAYING CAMERA STATUS
The number of frames remaining, the number of frames taken, and
the camera's low-battery warning are displayed in the main panel.
Click to change the image quality
mode. The estimated number of
frames remaining will change
accordingly.
Number of frames recorded on
the image memory card in the
camera.
Frames remaining on the image
memory card in the camera
(estimated).
Appears when the battery
power is low.
63