Minolta DIMAGE EX - SOFTWARE Software Instruction Manual page 11

CONNECTING THE CAMERA TO THE PC - CONT'D
Click on the Options tab.
Click on OK to close the window.
18
Ensure that the check boxes for
Enable infrared communication
on [Com port] and Search for
and provide status for devices in
range are checked.
Connecting
Switch the PC ON, then start Windows
Switch the camera power ON.
Set the camera to the PC connection mode.
• Side the Mode switch to PC.
Face the IrDA window on the camera towards the built-in or
external infrared port on the PC.
• See the diagram on page 20 for the positioning of the IrDA window on the camera and the built-in or
external infrared port on the PC.
• The PC automatically detects the camera, and the connection is established.
• The PC emits a beep when normal communications are established between the camera and the PC.
When the Infrared Monitor displays the Condition window,
the following screen appears if the connection is normal.
• The Condition window is displayed as follows.
1 Select Start / Settings / Control Panel.
2 Double-click the left button on the Infrared Monitor, and click the left button on the Condition tab.
® 98 or Windows ® 95.
19