Adding Audio To An Image (Macintosh Only) - Minolta DIMAGE EX - SOFTWARE Software Instruction Manual

USE OF THE FOLDER PANEL

Adding Audio to an Image (Macintosh only)

Adds audio to images saved on the hard disk.
• The macintosh must have a built-in or attached microphone.
Display the hard disk images on the folder panel (p. 30).
Click and hold on the microphone icon at the top-right of the
thumbnail image, and select Record from the pop-up menu.
• The Record window appears.
48
Click and hold.
Select Record from the
➧
pop-up menu.
Record the audio with the
Record window.
• Record the audio via the internal microphone or a
microphone connected to the sound input port.
• Begin recording by clicking on the • (Record) button,
and finish recording by clicking on the ■ (Stop) button.
• Click on the Play button to play back the recorded
audio.
• You may re-record as many times as necessary.
Click on Save to save the recorded audio.
• When the audio has been recorded the microphone icon at the top-right of the thumbnail image
changes to a speaker icon.
Changes to a speaker icon
Click on the speaker icon to display the pop-up menu.
Select Play to play back the recorded audio.
Select Delete to delete the recorded audio.
Click on the speaker icon
➧
Play back the recorded
audio
Delete the recorded
audio
Pop-up menu
49