Table of Contents
Advertisement
How to Copy a CD
The procedure assumes that your computer is equipped with a single
CD-RW drive (without an additional CD drive). If your computer is
equipped with both types of drives, see the Roxio documentation for
instructions on how to copy CDs from a CD drive to a CD-RW drive.
Click the Start button, point to All Programs→ Roxio Easy CD
1
Creator, and then click Project Selector.
The Select a Project window appears.
Click Disc Copier. (Disc Copier is titled "CD Copier" in some versions
2
of Easy CD Creator Basic.)
The Disc Copier window appears and displays your CD-RW drive in
the Copy from and the Record to lists.
Insert the source CD that you want to copy into the CD-RW drive.
3
The Disc Copier project program briefly checks the source CD in the
CD-RW drive to ensure that it is a readable CD.
Click Copy.
4
Depending on the size of the files that are being copied, the copy
process may take a few minutes.
After the source CD is copied, remove the source CD from the
5
CD-RW drive tray.
The CD-RW drive tray opens automatically after the source CD is
copied.
Insert a blank CD into the CD-RW drive and close the tray.
6
The recording starts automatically.
After the recording completes, click OK.
7
HINT: If you have a
DVD/CD-RW combo drive
and experience recording
problems, check the Roxio
support website at
support.roxio.com for
available software
patches.
HINT: You must use
CD-R discs to burn music
CDs that you want to
play in regular stereos.
CD-RW discs do not play
in most home or car
stereos.
33
Setting Up
Advertisement
Table of Contents
