Copying Cds And Dvds; How To Copy A Cd Or Dvd; Using Blank Cds And Dvds - Dell DIMENSION E510 DCSM Owner's Manual

Hide thumbs Also See for DIMENSION E510 DCSM:
Table of Contents

Advertisement

Copying CDs and DVDs

NOTE:
Ensure that you observe all copyright laws when creating CDs or DVDs.
This section applies only to computers that have a CD-RW, DVD+/-RW, or CD-RW/DVD (combo)
drive.
NOTE:
The types of CD or DVD drives offered by Dell
The following instructions explain how to make an exact copy of a CD or DVD. You can also use Sonic
DigitalMedia for other purposes, such as creating music CDs from audio files stored on your computer or
backing up important data. For help, open Sonic DigitalMedia and then click the question mark icon in
the upper-right corner of the window.

How to Copy a CD or DVD

NOTE:
CD-RW/DVD combo drives cannot write to DVD media. If you have a CD-RW/DVD combo drive and you
experience recording problems, check for available software patches on the Sonic support website at
www.sonic.com.
The DVD-writable drives installed in Dell computers can write to and read DVD+/-R, DVD+/-RW and
DVD+R DL (dual layer) media, but cannot write to and may not read DVD-RAM or DVD-R DL media.
NOTE:
Most commercial DVDs have copyright protection and cannot be copied using Sonic DigitalMedia.
1 Click the Start button, point to All Programs→ Sonic→ DigitalMedia Projects, and then click Copy.
2 Under the Copy tab, click Disc Copy.
3 To copy the CD or DVD:
If you have one CD or DVD drive, ensure that the settings are correct and click the Disc Copy
button. The computer reads your source CD or DVD and copies the data to a temporary folder on
your computer hard drive.
When prompted, insert a blank CD or DVD into the drive and click OK.
If you have two CD or DVD drives, select the drive into which you have inserted your source CD or
DVD and click the Disc Copy button. The computer copies the data from the source CD or DVD
to the blank CD or DVD.
Once you have finished copying the source CD or DVD, the CD or DVD that you have created
automatically ejects.

Using Blank CDs and DVDs

CD-RW drives can write to CD recording media only (including high-speed CD-RW) while DVD-
writable drives can write to both CD and DVD recording media.
Use blank CD-Rs to record music or permanently store data files. After creating a CD-R, you cannot
write to that CD-R again (see the Sonic documentation for more information). Use blank CD-RWs to
write to CDs or to erase, rewrite, or update data on CDs.
18
Setting Up and Using Your Computer
may vary by country.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dimension 5150 dcsmDimension 5150

Table of Contents