NOTE
board. Therefore, if you need to set any system switches, you might
want to do so while the system is already disassembled.
9.
Reassemble the system as follows:
T
Lift up the keyboard and align the tabs on the front of it with the
grooves in the system.
T
Reseat the keyboard in its original position.
T
Slide the speaker caps back onto the system.
T
Close the LCD panel and turn the system upside down.
T
Replace the speaker cap screws.
4-40 Using Your NEC Versa
The system switches are also located underneath the key-
Reassembling the system