NEC WINDOWS NT 4.0 SERVICE PACK 4 Important Information

®
Microsoft Windows NT
Important Information
Service Pack 4 is an update to the Windows NT operating system and is
intended to resolve known anomalies in the operating system. This information
applies to the installation and use of Windows NT 4.0 Service Pack 4 on the
following NEC Versa systems.
T
Versa LX
T
Versa SX
T
Versa 6060
T
Versa 6220-6260
T
Versa 5080
T
Versa 2780
The following sections provide important information on Windows NT 4.0 and
Service Pack 4 installation on these specified systems.
Versa LX and Versa SX
The following are a few items to consider when installing Service Pack 4 on
your NEC Versa system.
T
When installing Service Pack 4, a message, "Service Pack setup has
detected that the AMINT13 driver is or has been present on your system.
It must be disabled for your system to function properly with Service
Pack 4. If you do not disable the driver, your system may not boot.
Would you like to disable the driver? Yes No." Select "Yes."
for power management. You must run HDPREP from the
Applications and Drivers CD prior to installing Service Pack
4 in order to use power management Save-to-File. Then
install Service Pack 4 and answer "Yes" to disable
AMINT13.
Service Pack 3, it must be run again prior to installing
Service Pack 4.
Microsoft Windows NT 4.0 Service Pack 4 Important Information 1
4.0 Service Pack 4
™
Note:
The AMINT13 driver creates a Save-to-File file
Note:
If the system is already using Save-to-File with