Table of Contents
Advertisement
Note
Some older software may not work in a Windows 98 or Windows
2000 system configured for FAT 32.
Note
In Windows NT 4.0 systems, the Partition Information screen
does not appear. Instead, the FAT16 Partition warning appears. This
screen is described in the following paragraph.
7.
After you select the FAT type, a FAT 16 or FAT 32 Partition warning
screen appears indicating that the system is about to partition and
format your hard drive using the FDISK program. This warning
screen contains three options: Back, Exit, and Continue.
Click Continue. The following takes place:
8.
system performs FDISK using the FAT type selected
!
system reboots
!
partitions are formatted
!
!
OS and drivers load from the CD.
The "Operating System Restore Completed" screen appears when all
files have been restored.
9.
Remove the CD from the CD tray.
Click OK to reboot.
10.
This completes the Custom Rebuild and Restore procedure.
See "NEC Application and Driver CD" for instructions on installing any
of the applications or online documents, or to install device drivers that
did not come with your system.
Restore any application or driver that was not provided by NEC by using
the vendor diskette(s) or CD-ROM(s) included in its original packaging.
Configuring the System 3-35
Advertisement
Table of Contents
