System Controls And Lamps - NEC POWERMATE 2000 - 08-1999 Manual

System Controls and Lamps

System unit controls include a power/sleep button, power/sleep lamp, and
hard drive activity lamp.
Power/Sleep button
!
To turn system and LCD panel power on, press the power/sleep
button. To turn off power, press the button and hold in place for four
or more seconds before releasing.
To suspend system and LCD panel operation, press the power/sleep
button and release within three seconds or less. This places the system
unit and LCD panel in a power savings mode. Use this feature if you
plan to be away from your system for more than 15 minutes.
seconds or you will turn off the system and possibly lose data.
Press any key or move your mouse to resume system operation at the
point where you stopped it.
Power/Sleep lamp
!
The power lamp indicates whether system power is on or off. It also
lets you know if the system is operating in a power-saving mode.
A steady green lamp indicates that the power is on to all system
components. An amber lamp indicates that the system is in Sleep
mode with full-power reduction.
Hard drive activity lamp
!
A flashing green lamp indicates that the hard drive is active and is
reading or writing data.
necessary while the hard drive lamp is flashing. To do so can damage
your hard drive or data.
1-4 Reviewing System Features
Do not hold the button in any longer than three
Do not turn off the system unless absolutely