LAN Connector
All systems come with a local area network (LAN) connector for
connecting a network cable to the internal Intel
network board.
Use the RJ-45 compatible connector on the rear of the system for
connecting the system to an Ethernet LAN.
Bottom Features
A panel on the bottom of the system unit covers the memory expansion
sockets and the password clear jumper.
A – SO-DIMM Socket 0
B – Password Clear Jumper
Memory Sockets
Your system unit comes with at least one 64-MB small outline dual-inline
memory module (SO-DIMM) mounted in one of two memory sockets.
You can increase total system memory to a maximum of 256 MB by
using one 256-MB SO-DIMM module or two 128-MB modules (see
"Adding Memory Modules" in Chapter 5).
®
100Base-TX/10Base-T
Bottom features
C – SO-DIMM Socket 1
Reviewing System Features 1-11