Table of Contents
Advertisement
Menu Item
Floppy Disk Controller
Base I/O Address
Large Disk Access Mode
Local Bus IDE Adapter
QuickBoot Mode
Sound
PCMCIA Power
3-16 Configuring the System
Advanced Menu
Settings (default is bold)
Disabled, Enabled, Auto
Setting at Enabled allows the user to
configure the controller.
Setting at Auto enables the BIOS or
operating system to configure the controller.
Primary, Secondary
Sets the base I/O address for the controller.
Other, DOS
Select DOS if using DOS operating system.
Select Other if using another operating
system such as UNIX or Novell NetWare.
Disabled, Primary, Secondary, Both
Enables the integrated local bus IDE
adapter.
Disabled, Enabled
When Enabled, the BIOS does not test
system memory above 1 MB or wait for
ready signals, allowing a quick boot.
Enabled, Disabled
Select Disabled to turn off onboard sound.
3.3 V, 5 V
Selects voltage for PC card slots.
Advertisement
Table of Contents
