Table of Contents
Advertisement
2.
Turn off the system.
Put the flash diskette in drive A, and turn on the system.
3.
When the flash upgrade menu appears, choose Update Flash
4.
Memory Area from a file.
5.
When the menu asks you to enter a path/filename, use the arrow keys
to select the ".bio" file and press Enter.
The utility asks for confirmation to load the new flash into memory.
6.
Select Continue with Programming.
After the upgrade completes, remove the diskette.
7.
Reboot the system and start the Setup program. Press F5 to reset the
8.
BIOS defaults. Use the recorded Setup selections you made at the
beginning of this procedure to set the parameters.
NEC Application and Driver CD
Your system comes with an NEC Application and Driver CD. Use this
CD to install any or all of the software that comes with your system,
including
applications
!
utilities and device drivers
!
the NEC INFO Center (online documentation).
!
Note
If you restore the operating system, the drivers that were factory-
shipped are automatically installed.
Should a problem occur that causes data loss or corruption, you can
restore these files to your computer using one of the programs on the CD.
Launching the Application and Driver CD
Use the Application and Driver CD to install applications, drivers,
utilities, Internet browsers, and the online NEC INFO Center.
Configuring the System 3-25
Advertisement
Table of Contents
