Table of Contents
Advertisement
LAN
The LAN settings menu allows you to change the default IP address of the
Barricade, modify the DHCP server settings.
Parameter
LAN IP
IP Address
IP Subnet Mask
DHCP Server
Lease Time
IP Address Pool
Start IP Address/
End IP address
Domain Name
Description
The IP address of the Barricade.
The subnet mask of the Barricade.
This option allows you to enable or disable the DHCP
server function. By default DHCP is enabled.
Allows you to select a pre-defined lease time for IP
addresses assigned using DHCP. For home networks this
may be set to Forever, which means there is no time limit
on the IP address lease.
Specify the start/end IP address of the DHCP pool. Do
not include the gateway address of the Barricade in the
client address pool. If you change the pool range, make
sure the first three octets match the gateway's IP address,
i.e., 192.168.2.xxx.
If your network uses a domain name, enter it here.
Otherwise, leave this field blank.
4-31
C
ONFIGURATION PARAMETERS
Advertisement
Table of Contents
