Trap
Specify the IP address of the NMS to notify when a significant event is
detected by the agent. When a trap condition occurs, the SNMP agent
sends an SNMP trap message to any NMS specified as a trap receiver.
Parameter
IP Address
Community
Version
Description
Traps are sent to this address when errors or specific events
occur on the network.
A community string (password) specified for trap
management. Enter a word, something other than public or
private, to prevent unauthorized individuals from accessing
information on your system.
Sets the trap status to disabled, or enabled with V1 or V2c.
The v2c protocol was proposed in late 1995 and includes
enhancements to v1 that are universally accepted. These
include a get-bulk command to reduce network management
traffic when retrieving a sequence of MIB variables, and a
more elaborate set of error codes for improved reporting to a
Network Management Station.
4-68
C
ONFIGURING THE
B
ARRICADE