Table of Contents
Advertisement
RIP
Parameter
General RIP Parameters
RIP mode
Auto summary
Table of current Interface RIP parameter
Interface
Operation Mode
Version
C
ONFIGURING THE
Description
Globally enables or disables RIP.
If Auto summary is disabled, then RIP packets will
include sub-network information from all
sub-networks connected to the router. If enabled,
this sub-network information will be summarized
to one piece of information covering all
sub-networks.
The WAN interface to be configured.
Disable: RIP disabled on this interface.
Enable: RIP enabled on this interface.
Silent: Listens for route broadcasts and updates its
route table. It does not participate in sending route
broadcasts.
Sets the RIP (Routing Information Protocol)
version to use on this interface.
4-50
B
ARRICADE
Advertisement
Table of Contents
