Table of Contents
Advertisement
PPPoE
Parameter
VPI/VCI
Encapsulation
QoS Class
PCR/SCR/MBS
IP assigned by ISP
IP Address
Subnet Mask
Connect Type
Idle Time
(Minute)
Username
Password
Description
Enter the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) supplied by your ISP.
Select the encapsulation used by ISP from the drop-down
menu.
ATM QoS classes including CBR, UBR and VBR
QoS Parameters - PCR, SCR and MBS are configurable.
Select yes, if your ISP assigns IP address dynamically.
If you have selected "No" in the previous field, type in
the IP address provided by your ISP.
Enter the subnet mask address provided by your ISP.
Sets connection mode to Always connected,
Auto-Triggered by traffic or Manual connection. For flat
rate services use Always connected.
Enter the maximum idle time for the Internet
connection. After this time has been exceeded the
connection will be terminated. This setting only applies
when the Connect Type is set to Auto-Triggered by
traffic.
Enter user name.
Enter password.
4-27
C
ONFIGURATION PARAMETERS
Advertisement
Table of Contents
