Windows 2000 - SMC Networks -GT1255FTX-SC User Manual

4. Open your NT diagnostics utility and make sure that the SMC
adapter is listed under the "Resources" tab. This will verify that
the adapter was successfully initialized using the IRQ specified
in this section.

Windows 2000

1. Right-click the My Computer icon on your desktop and click
"Properties."
2. Then go to the Hardware tab and click "Device Manager."
Open the "Network adapters" section. You should see your
SMC1255FTX-SC in this menu. Right-click your adapter and
click "Properties."
3. The Device Status shows that the "This device is working
properly." If there are any error messages displayed here, you
will need to right-click the SMC adapter and click "Uninstall."
Then reboot the machine and go through the installation
process again.
W 2000
INDOWS
25