Windows 2000 - SMC Networks SMC2862W-G EZ Connect User Manual

Note:
Step 4:
driver installation is complete. Click [Finish] to exit the wizard.
Step 5:
Press [Yes]. Upon reboot, the SMC2862W-G will be initialized
and ready for use.

Windows 2000

Step 1:
2.4GHz 54 Mbps Wireless USB 2.0 Adapter in your machine and
turned it back on, the Operating System will automatically recognize
the adapter and prompt you for the appropriate drivers. Click the
[Next] button to begin the installation.
Step 2:
driver...] option. Then click [Next].
Step 3:
Then click [Next].
Step 4:
drivers. This should be x:\driver. (Note: The x equals the letter
of your CD-ROM drive. In most cases, this is D.) Then click [OK].
You can also click [Browse] and browse to the location of the
drivers on the CD for further verification.
Step 5:
button to continue the installation.
If the system could not find the drivers, click the [Back]
button, and select the [Display a list of all the drivers]
option. Select [Network Adapters] from the list of devices,
press [Have Disk] and once again browse to the location
of the drivers.
Once all the necessary files have been copied, the
You will then be prompted to reboot the machine.
After you have inserted the EZ Connect™ g SMC2862W-G
Insert the Driver CD and select the [Search for a suitable
Clear all checkboxes except for [Specify a location].
You will then be prompted to enter the location of the
The system should find the drivers. Click the [Next]
Windows 2000
11