SMC Networks -GT1255FTX-SC User Manual page 27

Note: To complete a TCP/IP installation, you will need to know
your IP Address and Subnet Mask. For further information,
contact your network administrator or Internet service
provider.
8. Click on "Next" and then "Next" again when prompted to
"Install Network Components." When prompted for Windows
NT files, type the path to your Windows NT files on CD-ROM
(e.g., D:\i386), or change the path to those files on your hard
drive, and click on "OK."
9. You are presented with the "Network Card Setup" window
where you can specify the network card data rate.
"AUTONEGOTIATE" is the recommended setting for the
network card. Select "Continue" after verifying the network
card settings.
10. Click on "Next" and then "Next" again when prompted to "Start
the Network."
W NT 4.0 I
INDOWS NSTALLATION
17