SMC Networks -GT1255FTX-SC User Manual page 29

"AUTONEGOTIATE" is the recommended setting for the
network card. Select "OK" after verifying the network card
settings.
8. You are presented with the "Network" window where the SMC
network card is now listed as an installed adapter. At this point
you can select "Close" to exit the Network applet and follow
the prompts to restart Windows NT.
9. Select "Yes" when prompted to reboot for the changes to take
effect.
For Further Customization
You can modify card settings via the "Network" applet. Install
additional protocols and network components by selecting the
appropriate folder (e.g., Customizing Protocols, Services,
Identification, or Bindings).
W NT 4.0 I
INDOWS NSTALLATION
19