I
NSTALLING AND
11. Enter the "Workgroup" or "Domain" names (optional) when
prompted and click on "Next."
12. Select "Finish" when prompted, and click on "Yes" when
prompted to reboot.
For Further Customization
You can modify card settings via the "Network" applet. Install
additional protocols and network components by selecting the
appropriate folder (e.g., Customizing Protocols, Services,
Identification, or Bindings).
Secondary Installation
Follow this procedure if you have already installed another
network card, configured Windows NT Networking, or loaded
another driver.
1. Install the SMC network card (if not already installed), attach
the network cable, and boot Windows NT.
2. Double-click on the "My Computer," "Control Panel," and
"Network" icons. From the "Network" window, select the
Adapter tab.
3. Do not select any of the network cards listed. Select "Add."
4. You are presented with the "Select Network Adapter" window.
Click on "Have Disk."
5. You are presented with the "Insert Disk" window. Specify the
path to the NT directory of the installation CD (e.g., D:\winnt)
and click on "OK."
6. Select the SMC1255FTX-SC adapter, and click on "Next."
7. You are presented with the "Network Card Setup" window
where you can specify the network card data rate.
18
C
N
ONFIGURING
D
ETWORK
RIVERS