Installation Guide; Hardware Installation; Software Installation; For Windows Xp - SMC Networks EZ Connect N SMCWUSBS-N4 User Manual

2
H I
ARDWARE NSTALLATION
S I
OFTWARE NSTALLATION
F W XP
OR INDOWS
I
NSTALLATION
There are two ways to install the Adapter:
Plug the Adapter directly to the USB port on your computer.
1.
Connect the Adapter and your computer through the USB cable
2.
attached in package.
The Found New Hardware Wizard screen will pop up when the
N :
OTE
adapter is installed correctly. Click Cancel.
The CD-ROM that comes with the package contains the USB driver and
software utility for the Wireless USB Adapter.
The installation screens are similar for Windows 2000, Windows XP,
Windows Vista and Windows 7. The installation interface for Windows XP is
shown in this user guide.
To install the Wireless USB Adapter's driver and utilities for Windows 2000
and Windows XP, follow these steps:
Turn on your PC and wait until the Windows system has completely
1.
started.
Load the EZ Installation & Documentation CD that comes with the
2.
package. The install program should start automatically.
If the install program does not start automatically, double-click My
N :
OTE
Computer, and then double-click the CD/DVD drive where the installation
CD was placed. Open the SMCWUSBS-N4 folder and double-click
"Setup.exe."
Click "Install Driver/Utility" to start the installation.
3.
– 13 –
G
UIDE