Settings; Setup Menu - VDO MS 6100 Owner's Manual

SETUP menu

☞
Touch the touchscreen, or
☞
press the OSD button on the remote control.
☞
Press "SET" on the touchscreen.
In the setup menu you can make the follow-
ing settings:
■
System settings – SYSTEM
☞
Touch the "System" symbol on the touchscreen.
Option Set value
Tilt Mode auto
manual
Beep Tone OFF, LO, HI
Time Set
Touch Adj. ADJUSTMENT
NAVI A. Mix OFF, Lv. 1 ... Lv 5, MAX
Default SET
■
Display settings – VIDEO
Display settings, see "TFT monitor", page 13.
■
Audio settings – AUDIO
Audio settings, see "Sound settings", page 16.
■
Setting the time
☞
Touch the time in the "System" setup menu.
☞
Use the arrow keys in order to change the digits for hours and minutes.
☞
Touch "12 H" or "24 H", in order to switch the time display (12-hour or 24-hour format).
☞
Touch "SET", in order to reset the seconds to zero.
☞
Touch "CLOSE" in order to complete setting of the time.
✎
During reception of an RDS station, the time is set automatically if necessary.

Settings

Description
The TFT monitor is retracted into the unit when it is
switched off. The viewing angle previously selected is
restored when the monitor is switched on again.
The TFT monitor remains in the set vertical position after
being switched off.
Set the volume of the acknowledgement tone.
Set the time, see "Setting the time".
Adjusting the touchscreen. Follow the onscreen instruc-
tions in order to adjust the touchscreen.
Volume of navigation instructions in relation to the
audio playback volume.
When "OFF", the navigation instructions are deactivated.
Reset all user-friendly settings to the factory defaults.
31