Selecting Source - VDO MS 6100 Owner's Manual

Selecting source

The available audio/video sources are shown in the top line of the OSD menu.
☞
Touch the field with the required source in order to switch to that source.
The following sources are available:
1. RADIO . . . . . . . . Switches to radio mode
2. DVD . . . . . . . . . . Switches to DVD player mode
3. SD* . . . . . . . . . . Switches to SD card mode
4. USB* . . . . . . . . . Switches to USB port mode
5. AUX . . . . . . . . . . Switches to the AV input
6. CAM . . . . . . . . . Switches to the reversing camera image
7. NAV . . . . . . . . . . Switches to navigation mode
8. SET . . . . . . . . . . . Calls up the setup menu
* Is only displayed if a relevant data medium has been inserted or connected.
■
Alternative source selection
☞
Press the MODE button on the unit or on the remote control repeatedly until the required
source is displayed.
The selected source is displayed on the TFT monitor.
■
Selecting a different video source
You can display a different video source on the TFT monitor while an audio source (e.g. radio)
is playing.
☞
Press the V.SEL button on the unit or on the remote control repeatedly until the required
source is displayed.
The video image of the selected source is displayed on the TFT monitor.
The selected video source (e.g. DVD) is shown highlighted in red in the OSD menu.
✎
The video source displayed cannot be controlled. The control elements continue to apply
to the active source (set via MODE).
✎
Not all combinations of sources can be selected. For example, the simultaneous display of
SD card and DVD is not possible.
☞
In order to switch the video image to the active source, touch the active source in the OSD
menu (highlighted in yellow) or press the MODE button once.
Operation
15