Page 1
MI 2200 Owner’s manual and mounting instruction Mode d’emploi et manuel d’installation Bedienungs- und Einbauanleitung Gebruiksaanwijzing en inbouwhandleiding Istruzioni d’uso e d’installazione Betjeningsvejledning og monteringsanvisning www.vdodayton.com...
Page 3
Attention Watching video while driving can easily distract your attention from traffic. To avoid the risk of injury of passengers or other road users, the driver should not watch video while driving. Please follow local regulations applying to in-car TV and video. Attention Si vous regardez des vidéos en roulant, votre attention diminue et vous vous concentrez moins sur la circulation et les panneaux de signalisation.
MI 2200, depending upon the driving situation. Monitor stand-by The MI 2200 is switched on and off together with the ignition (ACC / accessory contact). The monitors are automatically switched into standby mode after startup. Only if a navigation system and / or a reversing camera is installed, will monitor 1 be switched on, provided one of these AV sources is active.
Source selection By pressing the buttons assigned to the relevant monitors (8 button for monitor 1, 2 button for monitor 2) on the remote control, the MI 2200 toggles through the available sources as follows: AV 1 –> AV2 –> Stand-by –> AV1 ...
Do not install the unit positions where it is exposed to high temperatures, dust, dirt or exces - sive vibration (e.g. due to direct sunlight or heating vents). Scope of delivery MI 2200 Multi Media Interface Power cable Self-tapping screws 5 x 20 mm...
Page 7
Connect green wire to a suitable reversing signal point (positive lead of reversing light). Parking brake signal (grey) Connect grey wire to a suitable parking brake signal point. If the MI 2200 is used with both monitors for the rear passengers, the grey wire should be permanently connected to earth.
Page 8
Any video source with composite video output and analogue stereo output can be connected to the MI 2200. The MI 2200 switches through video signals of all video standards. Please ensure that the connected monitor is capable of displaying the television standard of the relevant video source.
Only perform the check in an open area. Brake system, alarm system, lighting system, immobiliser, speedometer, trip computer, radio (coding) and hi-fi system, clock. Service For up-to-date information, visit our web site: www.vdodayton.com or contact your VDO dayton dealer. Subject to technical modifications and errors.
MI 2200 en fonction de la situation du véhicule. Moniteur en veille Le MI 2200 s’allume / s'éteint lorsque vous mettez / coupez le contact (ACC). Au démarrage, les moniteurs passent automatiquement en mode Veille. Le moniteur 1 s’allume uniquement s’il est raccordé...
Page 11
Car Multimedia Systems. VDO Dayton. The Car Brand. MI 2200 09/2003 ri...