Operation; Control Elements - VDO MS 6200 Owner's Manual

Control elements

The functions of the VRM 6200 can be accessed using the buttons on the TFT monitor or
directly via the touchscreen. In addition, the functions for the rear zone can be controlled
using the supplied remote control when there is a rear monitor connected.
■
Control elements on the TFT monitor
1. l / POWER . . . . Muting on/off: Press briefly when the unit is switched on.
2. MODE . . . . . . . . . Source switching
3. j . . . . . . . . . . . . Next station/title/menu item
4. k . . . . . . . . . . . . Previous station/title/menu item
5. MENU . . . . . . . . . Call up main menu.
6. NAV . . . . . . . . . . . Switch to navigation system (if connected).
7. VOL – . . . . . . . . . Reduce volume
8. VOL + . . . . . . . . . Increase volume
9. . . . . . . . . . . . . . . Infrared receiver
10. F . . . . . . . . . . . . Press briefly: Open/close monitor fully.
11. . . . . . . . . . . . . . . Microphone for the Bluetooth
12. RESET . . . . . . . . . Unit reset: Press using a pointed object.

Operation

Switch on unit: Press briefly when the unit is switched off.
Switch off unit: Press and hold when the unit is switched on.
Press and hold: Swivel monitor until the desired viewing angle is reached.
®
hands-free unit
5