VDO MS 6200 Owner's Manual page 33

■
Hand brake signal – PARKING
☞
Connect the pink wire to a suitable hand brake point.
✎
When the hand brake is applied, the signal must lie at earth potential.
✎
For reasons of driving safety, video images from the DVD and AUX sources are only dis-
played on the TFT monitor of the main unit when the hand brake is applied.
■
Telephone mute – "MUTE":
☞
Connect the brown "MUTE" cable to the mute function output of your hands-free unit.
■
Navi audio switching – "NAVI MUTE":
☞
Connect the grey "NAVI MUTE" cable with the supplied quick connector to the MUTE out-
put of the navigation computer.
✎
Navigation instructions are then transmitted via the loudspeakers of the multimedia sys-
tem.
■
Reversing camera – "Camera":
Connect a reversing camera to this input.
✎
If the switch input for the reverse gear is connected (see Connection overview, ISO cham-
ber A), the video image from the reversing camera is displayed automatically as soon as
reverse gear is engaged.
✎
VDO Dayton reversing cameras can be connected via the MI 2050 interface.
■
AUX-AV input – "AUX IN VIDEO" and "AUX IN L/R":
☞
Connect the video output of the AV source to the yellow socket on the unit's front panel.
☞
Connect the right-hand channel of the AV source's audio output to the adapter cable's
red socket "AUX IN R".
☞
Connect the left-hand channel of the AV source's audio output to the adapter cable's
white socket "AUX IN L".
✎
Video signals are output to the TFT monitor only if the hand brake signal has been routed
properly (see "Hand brake signal – PARKING").
■
Audio/output front – "LINE OUT FRONT L&R":
A power amplifier and additional loudspeakers can be linked to the unit via this connection.
✎
In multi-zone operation, the front unit's audio signal is played via this output.
■
Monitor output – "REAR MONITOR":
An additional monitor (e.g. rear monitor) can be linked to the unit via this connection.
✎
In multi-zone operation, the video signal of the DVD player, AUX input or SD card reader
is played via this output.
■
Audio/output rear – "REAR ZONE OUT L&R":
When using a rear monitor, you can attach the audio signal to the monitor via this connec-
tion.
✎
In multi-zone operation, the audio signal of the DVD player, AUX input or SD card reader
is played via this output.
Installation instructions
33