VDO MS 6200 Owner's Manual page 13

Selecting the waveband
☞
Touch the BAND symbol (13) on the touchscreen to change the waveband.
✎
The following wavebands are available: FM-1, FM-2, FM-3, AM-1 and AM-2.
Tuning into stations
Stations can be tuned/scanned in a number of ways:
■
Automatic search
☞
Touch the y or x symbol on the touchscreen to tune to the next station with a strong
signal in the currently selected waveband.
✎
If TA is active, the radio will search only for stations from which traffic announcements
can be received.
■
Setting the frequency manually
☞
Touch the > or < symbol on the touchscreen to change the reception frequency
incrementally.
Station preset
■
Storing a station
You can store 6 stations for each waveband in preset locations P01 to P06.
☞
Tune to the desired waveband and station.
☞
Touch the desired preset location in the list for at least 3 seconds to store the selected sta-
tion in this location.
■
Recalling stored stations
☞
Tune to the desired waveband.
☞
Touch the desired preset location in the list to call up the desired station.
■
Scanning receivable stations
☞
Touch the SCAN symbol on the touchscreen to briefly scan all of the stored stations in the
current waveband.
☞
Touch the symbol again to stop the scanning process.
■
Auto Store (AS)
Activate this function to automatically store up to 6 stations with strong signals in the cur-
rent waveband.
☞
Touch the Auto Store symbol (14) on the touchscreen to start the Auto Store process.
✎
All stations manually stored in the preset locations of the current waveband are overwritten.
Operation
13