VDO MS 6200 Owner's Manual page 18

18
Repeating a chapter/title
☞
Touch the T symbol once or several times during playback to set REPEAT mode as follows:
❑
DVD: Repeat Title, Repeat Chapter, Repeat Off.
❑
VCD/CD: Repeat Single, Repeat Off.
❑
MP3: Repeat Single, Repeat Folder, Repeat Off.
■
Marking and repeating a film sequence (A->B)
☞
Touch the A symbol during playback to specify the beginning of a desired film sequence.
☞
Touch the A symbol again to specify the end of the desired film sequence.
:
The player now repeats the marked film sequence continuously.
☞
Touch the A symbol again to exit the function and return to normal playback.
GOTO function
For jumping directly to a specific title/chapter or to a specified time.
During playback:
☞
Touch function area F (top right) of the touchscreen to activate the GOTO function.
☞
Touch the desired category: Title/chapter or time (for DVD) and time or title (for VCD).
☞
Using the number pad, enter the desired time or the desired title/chapter and confirm
with "OK".
Selecting the camera angle (DVD only)
When the "ANGLE MARK" (camera angle) function is activated, the camera symbol is dis-
played on the screen when a scene with alternative camera angles is played from a DVD.
☞
Press the ANGLE button on the remote control once or several times while the camera sym-
bol is displayed on the monitor to select the desired camera angle.
✎
This function is only available if there are scenes with alternative camera angles on the
DVD currently loaded.
✎
The number of camera angles depends on the DVD.
✎
For information on activating "ANGLE MARK", see "DVD setup".
Zoom (magnification)
☞
Press the ZOOM button on the remote control once or several times during playback to select
the desired zoom factor: Q1 –> Q2 –> Q3 –> Q4 –> OFF.
Operation