Stop Guidance; Travel Info - VDO MS 5400 Manual

Storing a via point
u
Select "Store via point" and press the OK button.
Deleting via points
u
Select "Delete via point" and press the OK button. A list of the
stored via points appears.
u
Select the via point to be deleted and press the OK button. A
popup menu with the entry appears.
u
Select "Delete" and press the OK button, if you wish to delete the
displayed via point from memory.
u
Select "Quit" and press the OK button, if you do not wish to
delete it.
Should the memory already contain 25 via points, a note is displayed
stating that no further via points can be stored. Press the OK button.
Should you wish to enter a new via point, one of the previously entered
via points must be deleted.
t
If all via points are to be deleted, it is possible to delete the destination
along with all via points under "Navigation".

Stop guidance

If you are in one of the guidance screens, guidance can be stopped at any
time.
u
Press the OK button, select the option "Stop guidance", and press
the OK button.

Travel info

In the start menu, the button "Travel info" can be selected, if this
information is available on the DVD/CD, and if you have activated at least
one provider of travel guide information (see also chapter C-IQ - your key
to map, traffic and travel information). This button can be used to select
NAVIGATION
35