Cd/Mp3 Player - VDO CD 2604 MP3 User Manual

RADIO DATA SYSTEM (RDS) ON FM
Many FM stations broadcast RDS information.
This set uses the RDS information to offer you
many advantages including:
DISPLAY OF STATION NAME
The set displays the name of the station instead
of its frequency.
AUTOMATIC FREQUENCY (AF)
The set remains tuned to the current station
by continually searching for the best possible
alternative frequency for reception.
Note : You can switch off AF when not required,
see 'SETUP', 'Tuner' option 'AF'.
ALARM MESSAGES (PTY ALARM)
This set automatically receives emergency
messages made by the broadcaster.
• During the messages the display shows
'ALARM' and the station-name alternately.
TRAFFIC ANNOUNCEMENTS (TA)
You can activate the TA mode to give priority
so as to hear announcements related to these
subjects, (even if you play a CD/MP3 or mute
the set).
Activate/deactivate TA
1. Press TA button to activate/deactivate TA.
Activate/deactivate NEWS*
1. Go to 'SETUP', 'TUNER' and select option
'NEWS', set the value to ON.
If you activate TA/NEWS mode :
• You will hear the Traffi c/NEWS*
Announcements when broadcast.
• If the tuned station does not enable the
reception of Traffi c Announcements, the
display shows
'NO TA'. The radio automatically searches an
appropriate station.
News announcements may be interrupted
by Traffi c Announcements (if the TA mode is
switched on).
Interrupting Traffi c Announcement
If you do not wish to continue listening to a
particular Traffi c Announcement or News mode,
you can interrupt it without switching off the
mode.
1. Press TA button once.
• The set will return to the previous operating
mode.
18
Note:
You can switch off RDS features if not required.
1. Go to SETUP, TUNER and select
option RDS to OFF.
• All above RDS related features e.g. TA,
NEWS* etc... will be deactivated when
option 'RDS' is set to 'OFF'.

CD/MP3 Player

Loading CD in the CD player
1. Press REL to open the front.
2. Insert the CD (label upwards) into the
slot.
3. Close the front: The playback starts.
Ejecting CD from the CD Player
1. Press REL to open the front.
2. Press the EJECT button to eject the CD.
3. Remove the disc.
4. Close the front.
Listening to CD/MP3
If the CD is already inserted:
1. Press the HOME button.
2. Use the ( / ) button to select CD source.
3. Press OK to get to the CD source.
You can set the CD options after selecting
the CD source.
Note 1: If fi rst track is a data track, the disc
will treat as MP3. (If no *.MP3 fi le was found
throughout the disc, then it will treat as audio
disc). If fi rst track is an audio track, the disc will
treat as audio disc.
Note 2: If the 'Disc Name' is programmed to
the disc, each time this disc is reloaded in the
systems (CD drive or CD Changer), the 'Disc
Name' stored in the memory will be displayed in
the start up sequence.
Note 3: If TA and NEWS are set to ON,
announcements will interrupt CD playback.
CD playback
This CD player is suitable only for 12cm disc
and can read both audio and MP3 format CD.
Please do not use irregular shaped CD.
MP3 playback
You are able to listen to MP3 fi les that conform
to MPEG1/2 & 2.5-Layer 3 at bit rate up to
320kbps or Variable Bit Rate (VBR) burned ID3
tag on a CD-R or CD-RW disc in ISO9660 level
1 and 2 format are also supported.