Troubleshooting - VDO CD 2604 MP3 User Manual

SMART VOLUME (SDVC- Signal dependent
volume control)
See 'INSTALLATION' for connection
instructions.
To compensate for surrounding noise, this
function automatically increases the volume
of the set with respect to the car's speed. Four
compensation levels can be selected. Level 1
gives a small increase while level 4 gives a
greater increase. See 'SETUP', option 'SMART
VOL' to select the level until you fi nd one which
suits your car.
TELEPHONE IN WITH HANDSFREE CARKIT
You can connect the headunit to handsfree car
kit to have a simple handsfree function.
Go to 'SETUP' mode, enter 'SYSTEM', select
the options [HFREE OFF, MUTE LO, MUTE HI,
HFREE LO, HFREE HI]
- Select 'HFREE OFF' if no car phone is
connected to the set.
- Select 'HFREE LO' or 'HFREEHI' (according
to phone type) to automatically interrupt
the set's sound output when using your car
phone.
Note: Consult your dealer for appropriate
telephone in adaptor cable to your car kit.
TELEPHONE MUTE
You can mute the headunit speaker sound by
connecting the telephone mute signal to the
headunit mute wire (pink).
Go to 'SETUP' mode, enter SYSTEM, select
either 'MUTE LO' or 'MUTE HI' depends on type
of handphone. If it is set wrongly, set's display
will show 'phone' and sound will be muted.
CLOCK FUNCTION
Setting the clock (manually)
- See 'SETUP', option 'CLOCK'.
Note:
You can select 12 hour or 24 hour clock display.
RDS clock (auto update)
You can select an automatic update of the clock
via the RDS radio signal.
- See 'SETUP', option 'CLOCK'.
The transmitted time via RDS can be incorrect.
SERVICE REMINDER
- See 'SETUP' option 'SERVICE ALERT'.
SERVICE DISTANCE UNIT
- See 'SETUP' option 'DISTANCE'.
INTERVAL DISTANCE OF SERVICE
- See 'CAR COMPUTER', option 'SERVICE
ALERT' to select the right interval distance.
Note:
- 'SERVICE' function is only valid when car
speed has calibrated.
SPEEDING WARNING
You can set a safety speed, when your drive
speed is faster than your setting safety speed,
the radio will remind you. See 'SETUP' option
'WARNING' to set your safety speed.
Note:
- This function is only valid when car speed has
calibrated.
TEMP WARNING
You can set this function to warn you when
temperature is lower than 3 degree Celsius.
See 'SETUP', option 'WARNING'.

TROUBLESHOOTING

SYMPTOMS CAUSE/REMEDY
NO POWER Verify:
The radio does not function.
> the set is well inserted in the dashboard (see
MOUNTING).
> the set is well connected (see Installation
Card and INSTALLATION)
The set does not function and the display
screen does not light up.
> Switch off the set.
> Check the fuse (see INSTALLATION).
NO SOUND Verify:
The display screen lights up but the set gives
no sound (or only a whistle).
> Increase the volume: if you are listening to
the radio, move to an area where the station
reception is better.
> Check the antenna and its connection (see
INSTALLATION).
> Check if the station search is fi nished.
> If your mobile phone is connected, check the
Phone setting.
Verify the speakers connections to B (see
INSTALLATION) and the speakers balance (see
Sound Menu).
25