Security; Home Page - VDO CD 2604 MP3 User Manual

SECURITY

FRONT
REMOVING THE FRONT
1- Press the REL key.
2- Pull the front towards you. Follow the
diagram mounted on the back of the
detachable unit.
3- Take the detachable front with you when you
leave the car.
4- Keep the front in its protective cover.
REPLACING THE FRONT
1- Put the left side of the front into the socket of
the set.
2- Push the right side of front into place until it
clicks into position.
Note 1 : If you hear a warning signal, the front is
not properly replaced.
Note 2 : To ensure good connection between
the set and the detachable unit, it is advisable
to clean frequently the connections with a
cotton swab from time to time.
LOCKING THE DETACHABLE FRONT
The detachable front can be locked by a D2 x
10 screw.
- Remove the trim plate
- Flip down the detachable front.
- Insert a D2 x 10 screw (inside the
accessories bag) in position (1).
WARNINGS
Warning LED
When the engine is switched off and the front
is removed, the warning LED fl ashes.You can
switch off the warning LED (see SETUP menu,
Warning LED function).
IDENTIFICATION NUMBER
The set has a unique identifi cation number
(stated on the 'Security card').This card is
required as a proof of ownership when the set
is stolen, when the detachable front is lost or
when requesting service.
8

HOME PAGE

Switching On/Off
• Short press (left) rotary knob to switch
on the set.
• Long press rotary knob for more than 2
seconds to switch off the set.
SELECTING A SOURCE
Your car radio is designed for different types of
sources. You can view the source menu by long
or short press on the HOME/ESC key (depends
on which level of source view you are currently
in).
> TUNER
> CD/MP3
> CD/MP3/DVD CHANGER
> TELEPHONE
> AUXILIARY IN
> SD/MMC
> CAR COMPUTER
> SETUP
> SOUND
Press OK to activate the selected source.
VOLUME
Please make sure you can still hear the traffi c
(horns, sirens......)
- Turn the volume knob to adjust the volume.
The volume automatically increase or
decrease if the SMART Volume connection
has been installed and selected (See
Installation).
Note : You can adjust the start-up volume. When
the start-up volume is set to maximum level, it
may be extremely loud when you switch on the
set. See 'SETUP', option 'START VOL'.
Mute
• Press Power rotary knob to mute/demute the
sound when the set is switched on.
Note: You can set the mute level to SILENT,
-20dB, -12dB or -6dB.