M A I N T E N A N C E A N D C A R E; Gear Adjustment - SRAM DUALDRIVE Manual

M A I N T E N A N C E A N D C A R E

G E A R A D J U S T M E N T
G E A R H U B
Place thumb shift lever
3
in standard mode.
Match up the yellow marks in
4
the Clickbox viewing window
by twisting the barrel adjuster.
D E R A I L L E U R
Limit screw adjustment:
View the rear derailleur and
5
pulleys from behind the rear of
the bicycle.
» Turn the limit screw marked 'H' on
the outer link of the derailleur to
align the upper guide pulley cen-
ter with the outboard edge of the
smallest cog – clockwise moves
the guide pulley inboard towards
the wheel.
» While turning the crank, push the
rear derailleur towards the larger
cogs by hand.
» Align the upper guide pulley under
the largest cog, by turning the
limit screw marked 'L' on the outer
link – clockwise moves the guide
pulley outboard away from the
spokes.
8
3
4
5
DualDrive · December 2002