Cleaning And Lubrication - SRAM DUALDRIVE Manual

M A I N T E N A N C E A N D C A R E
C L E A N I N G A N D L U B R I C A T I O N
C L E A N I N G
Your DualDrive components
10
are well protected against
adverse environmental influences.
In order to avoid malfunction due
to water penetration, pressurized
jets (high pressure cleaners etc.)
should not be used when cleaning
the bicycle.
» When using the bike during the
winter more frequent cleaning is
necessary to prevent damage
caused by de-icing salt.
» Do not use solvants or corrosive
materials to clean the compo-
nents.
» Clean dirty chains before oiling.
Do not use any grease-dissolving
or acidic agents. Cleaning agent
must be rinsed off after a few
minutes with water. Apply oil after
chain is completely dried.
L U B R I C A T I O N
» DualDrive hubs are provided with
permanent lubrication and
maintenance-free under normal
conditions.
Lubricate the shifting joints
11
regularly. Grease any cable
guides (e.g. beneath the bottom
bracket).
» Regular lubrication will extend the
chain's service life.
DualDrive · December 2002
10
11
E
Lubricate the
shifting joints
regularly
11