SRAM DUALDRIVE Manual page 16

A S S E M B L Y
O F C O M P O N E N T S
A S S E M B L Y S H I F T E R
Slide the shifter (5) onto the
21
handlebar.
» Rotate the shifter until the barrel
adjuster (6) is beneath (but out of
the way of) the brake lever.
» Tighten the 3 mm hex clamp bolt (7)
to 1.9 – 2.5 Nm (17 – 22 in.lbs.).
» Slide the handlebar grip (8) onto
the handlebar.
Never use lubricants or
solvents to install handlebar
grips. Handlebar grips provide an
axial safety function. For this
reason, they should be mounted in
such a way as to make sure they
do not slip off handlebar.
» Check that the shifter and brake
lever function properly and are
unobstructed.
» Never ride without the handlebar
grips, this can result in severe
injury or death.
16
21
6
DualDrive · December 2002
5
7
8