Dtr Signal; Response Strings; Configuring Advanced Modem Setup; Figure 75 Network > Wan > Dial Backup > Edit - ZyXEL Communications ZYWALL 2 WG User Manual

Hide thumbs Also See for ZYWALL 2 WG:

Table of Contents

8.16.2 DTR Signal

The majority of WAN devices default to hanging up the current call when the DTR (Data

Terminal Ready) signal is dropped by the DTE. When the Drop DTR When Hang Up check

box is selected, the ZyWALL uses this hardware signal to force the WAN device to hang up,

in addition to issuing the drop command ATH.

The response strings tell the ZyWALL the tags, or labels, immediately preceding the various

call parameters sent from the WAN device. The response strings have not been standardized;

please consult the documentation of your WAN device to find the correct tags.

Click the Edit button in the Dial Backup screen to display the Advanced Setup screen.

Consult the manual of your WAN device connected to your dial backup port for

specific AT commands.

Figure 75 NETWORK > WAN > Dial Backup > Edit

ZyWALL 2WG User's Guide

Chapter 8 WAN Screens