Chapter 36 IP Static Route Setup
Figure 318 Menu 12: IP Static Route Setup
Now, enter the index number of the static route that you want to configure.
Figure 319 Menu 12. 1: Edit IP Static Route
`The following table describes the IP Static Route Menu fields.
Table 216 Menu 12. 1: Edit IP Static Route
FIELD
Route #
Route Name
Active
Destination IP
Address
530
Menu 12 - IP Static Route Setup
1.Reserved
16.________
2.Reserved
17.________
3.________
18.________
4.________
19.________
5.________
20.________
6.________
21.________
7.________
22.________
8.________
23.________
9.________
24.________
10.________
25.________
11.________
26.________
12.________
27.________
13.________
28.________
14.________
29.________
15.________
30.________
Enter selection number:
Menu 12.1 - Edit IP Static Route
Route #: 3
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to CONFIRM or ESC to CANCEL:
DESCRIPTION
This is the index number of the static route that you chose in menu 12.
Enter a descriptive name for this route. This is for identification purposes only.
This field allows you to activate/deactivate this static route.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host,
use a subnet mask of 255.255.255.255 in the subnet mask field to force the network
number to be identical to the host ID.
ZyWALL 2WG User's Guide