Weighted Round Robin; Spillover; Figure 65 Load Balancing: Weighted Round Robin; Table 35 Load Balancing: Weighted Round Robin - ZyXEL Communications ZYWALL 2 WG User Manual

Hide thumbs Also See for ZYWALL 2 WG:

Table of Contents

Chapter 8 WAN Screens

Table 34 Load Balancing: Least Load First (continued)

8.7.2 Weighted Round Robin

To load balance using the weighted round robin method, select Weighted Round Robin in the

Load Balancing Algorithm field.

The following table describes the related fields in this screen.

Active/Active

Load Balancing

To load balance using the spillover method, select Spillover in the Load Balancing

Algorithm field.

This field displays the name of the WAN interface (WAN 1 and WAN 2).

This field is applicable when you select Outbound + Inbound or Inbound Only in

the Load Balancing Index(es) field.

Specify the inbound (or downstream) bandwidth (in kilo bites per second) for the

interface. This should be the actual downstream bandwidth that your ISP provides.

This field is applicable when you select Outbound + Inbound or Outbound Only in

the Load Balancing Index(es) field.

Specify the outbound (or upstream) bandwidth (in kilo bites per second) for the

interface. This should be the actual upstream bandwidth that your ISP provides.

Select Active/Active Mode and set the related fields to enable load balancing on the

Set the load balancing method to Weighted Round Robin.

This field displays the name of the WAN interface (WAN 1 and WAN 2).

Specify the weight for the interface. Enter 0 to set the ZyWALL not to send traffic load

to the interface. The higher the number, the bigger the weight (the more traffic sent).

ZyWALL 2WG User's Guide