Figure 57 Network > Bridge; Table 29 Network > Bridge - ZyXEL Communications ZYWALL 2 WG User Manual

Hide thumbs Also See for ZYWALL 2 WG:

Table of Contents

Chapter 7 Bridge Screens

Figure 57 NETWORK > Bridge

The following table describes the labels in this screen.

Table 29 NETWORK > Bridge

Bridge IP Address Setup

IP Subnet Mask

Gateway IP Address

First/Second/Third DNS

Rapid Spanning Tree

Protocol Setup

Enable Rapid Spanning

Tree Protocol

Type the IP address of your ZyWALL in dotted decimal notation.

The subnet mask specifies the network number portion of an IP address.

Enter the gateway IP address.

DNS (Domain Name System) is for mapping a domain name to its

corresponding IP address and vice versa. The DNS server is extremely

important because without it, you must know the IP address of a machine

before you can access it. The ZyWALL uses a system DNS server (in the

order you specify here) to resolve domain names for content filtering, the

time server, etc.

If you have the IP address(es) of the DNS server(s), enter the DNS server's

IP address(es) in the field(s) to the right.

Select the check box to activate RSTP on the ZyWALL.

ZyWALL 2WG User's Guide

Troubleshooting