Resetting The Zyair; Method Of Restoring Factory-Defaults; Navigating The Zyair Web Configurator - ZyXEL Communications ZYAIR G-1000 User Manual

ZyAIR G-1000 Access Point User's Guide
The ZyAIR automatically times out after five minutes of inactivity. Simply log back
3.2

Resetting the ZyAIR

If you forget your password or cannot access the ZyAIR, you will need to reload the factory-default
configuration file or use the RESET button on the top panel of the ZyAIR. Uploading this configuration file
replaces the current configuration file with the factory-default configuration file. This means that you will
lose all configurations that you had previously and the speed of the console port will be reset to the default of
9600bps with 8 data bit, no parity, one stop bit and flow control set to none. The password will be reset to
"1234", also.

3.2.1 Method of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in three ways:
1. Use the RESET button on the top panel of the ZyAIR to upload the default configuration file (hold this
button in for about 10 seconds or until the Link LED turns red). Use this method for cases when the
password or IP address of the ZyAIR is not known.
2. Use the web configurator to restore defaults.
3. Transfer the configuration file to your ZyAIR using the SMT menus. See the part on SMT configuration
for more information.
3.3

Navigating the ZyAIR Web Configurator

The following summarizes how to navigate the web configurator from the MAIN MENU screen.
Follow the instructions you see in the MAIN MENU screen or click the
(located in the top right corner of most screens) to view online help.
The
3-2
into the ZyAIR if this happens to you.
icon does not appear in the MAIN MENU screen.
Introducing the Web Configurator
icon