Resetting The Nwa1000 Series - ZyXEL Communications NWA1000 Series User Manual

Chapter 27 Troubleshooting
• Turn the NWA1123-AC PRO indoor AP counter-clockwise to detach it from the mounting bracket.

27.6 Resetting the NWA1000 Series

If you cannot access the NWA1000 Series by any method, try restarting it by turning the power off and
then on again. If you still cannot access the NWA1000 Series by any method or you forget the
administrator password(s), you can reset the NWA1000 Series to its factory-default settings. Any
configuration files or shell scripts that you saved on the NWA1000 Series should still be available
afterwards.
Use the following procedure to reset the NWA1000 Series to its factory-default settings. This overwrites the
settings in the startup-config.conf file with the settings in the system-default.conf file.
Note: This procedure removes the current configuration.
Make sure the Power LED is on and not blinking.
1
NWA1000 Series User's Guide
210