ZyAIR G-1000 Access Point User's Guide
When your ZyAIR's authentication method is set to open system, it will only accept open system
authentication requests. The same is true for shared key authentication. However, when it is set to auto
authentication, the ZyAIR will accept either type of authentication request and the ZyAIR will fall back to
use open authentication if the shared key does not match.
6.3
Configuring WEP Data Encryption
In order to configure and enable WEP encryption; click ADVANCED and then WIRELESS to display the
Wireless screen.
Figure 6-3 Wireless
The following table describes the wireless LAN security fields in this screen.
Wireless Security
6-3