Table of Contents
Advertisement
Chapter 2 The Web Configurator
Table 2 Web Configurator Screens Summary (continued)
LINK
Advanced
Wireless
(P-974HW
Only)
Maintenance
2.4 Changing the Login Password
It is highly recommended that you periodically change the password for accessing
the ZyXEL Device. If you didn't change the default one after you logged in or you
want to change to a new password again, then click Maintenance > Security to
display the screen as shown next.
Figure 5 Maintenance: Security
26
SUB-LINK
FUNCTION
Options
Use this screen to activate/deactivate WAN features
(such as IPSec passthrough and Multicast).
IP Filtering
Use this screen to block access from one or a range of
IP addresses.
MAC Filtering
Use this screen to block access from the specified MAC
address(es).
Port Filtering
Use this screen to block access from one or a range of
ports.
Forwarding
Use this screen to configure port forwarding on your
network.
Basic
Use this screen to configure the wireless LAN settings.
Security
Use this screen to configure WLAN authentication and
security settings.
Access Control
Use this screen to configure MAC filter settings on the
ZyXEL Device.
Bridging
Use this screen to configure WLAN bridging.
Security
Use this screen to change system password or reset
the ZyXEL Device back to the factory defaults.
Diagnostics
These screens display information to help you identify
problems with the ZyXEL Device general connection.
Band
Use this screen to set up scan sets for Internet access
providers.
P-974H/HW Series User's Guide
Advertisement
Table of Contents
