Appendix B Sample Configurations; Overview; Connecting To The Zyxel Device With Telnet - ZyXEL Communications P-974H - V3.70 Manual

A
P P E N D I X

7.5 Overview

The following are some sample configurations for your ZyXEL Device. The values
used in these samples are for example purposes only; please use the values
provided by your ISP where appropriate.

7.6 Connecting to the ZyXEL Device with Telnet

Before you can use these sample configurations, you must first connect to the
ZyXEL Device with Telnet.
Open your Command Line prompt or terminal application.
1
Telnet to 198.162.1.1.
2
Login as admin (default password "1234").
3
After connecting to the ZyXEL Device, you can enter any of the commands in the
following samples. Be sure to customize them first.
P-974H/HW Series User's Guide
Sample Configurations
B
77