Figure 135 System Time Setting - ZyXEL Communications P-660H Series User Manual

Table 89 System General Setup
LABEL
Admin Password If you log in with the admin password, you can configure the advanced features as
Old Password
New Password
Retype to
Confirm
Apply
Cancel
17.2 Time Setting
To change your ZyXEL Device's time and date, click Maintenance > System > Time
Setting. The screen appears as shown. Use this screen to configure the ZyXEL Device's time
based on your local time zone.

Figure 135 System Time Setting

Chapter 17 System
DESCRIPTION
well as the wizard setup on the ZyXEL Device.
Type the default admin password (1234) or the existing password you use to access
the system for configuring advanced features.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Type the new password again for confirmation.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
P-660H/HW-D Series User's Guide
228