Figure 134 System General Setup; Table 89 System General Setup - ZyXEL Communications P-660H Series User Manual

P-660H/HW-D Series User's Guide

Figure 134 System General Setup

The following table describes the labels in this screen.

Table 89 System General Setup

LABEL
General Setup
System Name
Domain Name
Administrator
Inactivity Timer
Password
User Password
New Password
Retype to
Confirm
227
DESCRIPTION
Choose a descriptive name for identification purposes. It is recommended you enter
your computer's "Computer name" in this field. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes "-" and
underscores "_" are accepted.
Enter the domain name (if you know it) here. If you leave this field blank, the ISP
may assign a domain name via DHCP.
The domain name entered by you is given priority over the ISP assigned domain
name.
Type how many minutes a management session can be left idle before the session
times out. The default is 5 minutes. After it times out you have to log in with your
password again. Very long idle timeouts may have security risks. A value of "0"
means a management session never times out, no matter how long it has been left
idle (not recommended).
If you log in with the user password, you can only view the ZyXEL Device status.
The default user password is user.
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays a (*) for each character you type. After you change
the password, use the new password to access the ZyXEL Device.
Type the new password again for confirmation.
Chapter 17 System